Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 53154 | PORTLAND VALVE LLC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ATPC | STEP QUANTITY | 8 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 2.2500 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 2.765 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 1.9350 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| AMFZ | SECOND END DIAMETER | 2.7450 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | LEVER MACHINED ON SHAFT; 2.525 IN. FROM SECOND END; 4.700 IN. LG; 0.875 IN. W |
| AAHP | SECOND END STYLE | SLOTTED |
| ABHP | OVERALL LENGTH | 8.760 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT) |
| BDSQ | FIRST END SPLINE QUANTITY | 10 |
| MATT | MATERIAL | STEEL |
| AKTN | SECOND END SLOT WIDTH | 0.560 INCHES NOMINAL |
| AMGR | SECOND END SLOT DEPTH | 0.430 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 1.860 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 2.2500 INCHES NOMINAL |